|
The Safety Seal Cap is designed to replace high pressure bull plugs used in venting & draining SAGD steam and heavy oil piping. - Locks under residual / line pressure
- Can be retightened to seal
- Outer seal & locking threads are located OUTSIDE the wetted surfaces
- All caps have chains
- Valve mounted couplings halves can be safely rodded, steam cleaned, pressure purged with specially designed & CRN registered adapters.
- CRNs exist
- NACE materials of construction
Available Sizes- Available sizes
- 3/4” 1.91 cm
- 1” 2.54 cm
- 1 1/2” 3.81 cm
- 2” 5.08 cm
- Other sizes available upon request
Available Materials- A350LF2 (NACE/CHARPY V NOTCH)
- F5, F9, F11
- SS347
- SS316
- Incoloy 825
- Other materials available upon request
End Configuration- Butt weld, socket weld, NPT (male and female).
- Others available upon request
Animations
|
